Tech & Giveaways

VandyVape Berserker Mini MTL RTA | Perfect MTL-Vape

VandyVape Berserker Mini MTL RTA intro

Now not way back, VandyVape launched the Berserker MTL RTA in cooperation with Alex from VapersMD. Now, VandyVape has created a mini model of the similar design. With the exception of being TPD-compliant, it is useful for someone who likes the unique Berserker however prefers a smaller setup. It provides you with a nice-looking small RTA that may are compatible on smaller field mods — like the preferred Eleaf Pico — to create a a extra compact MTL setup.

Since I normally use smaller setups or pod mods, this little Berserker regarded best to me. A large number of firms are beginning to care once more about MTL vapers, and I recognize that. Will the Berserker Mini overcome the marketplace and depart all its competition within the mud? Let’s dive into it!

Value: $39.99

Colours: chrome steel, black, gold, and rainbow.

VandyVape Berserker Mini MTL RTA gallery

VandyVape Berserker Mini MTL RTA specifications and Options

Package Content material

  • Berserker Mini MTL RTA
  • Ultem drip tip
  • 2 mL Ultem tube
  • 2 mL glass tube
  • Accent bag

Specs

  • Threaded peak fill machine
  • Two huge kidney-shaped fill ports
  • Two-post
  • single-coil deck
  • Best fixed Phillips screws
  • Twin wicking ports
  • Adjustable air slot sizes zero.eight / 1.zero / 1.2 / 1.four / 1.6 mm
  • Gold-plated 510 pin

Notable Remarks

Design and construct high quality

VandyVape mini MTL RTA

We gained the gold model of the Berserker Mini RTA, and it seems to be beautiful. It’s all gold, except the drip tip (which is ultem, so it seems to be matchy matchy). The RTA comes with the steel tank segment pre-installed. I needed to transfer that out straight away. Don’t get me fallacious, the steel tube seems to be tremendous superior, however for my part it doesn’t make sense for a small tank since there’s no window to observe e-liquid ranges. Fortunately, the tank additionally comes with each Ultem and transparent glass tanks.

Whilst disassembling the tank, I checked the standard of the threading and O-rings. The tank could be very neatly machined. I couldn’t in finding any sharp edges, burrs, or different production mishaps. And the threads are clean. However the peak cap’s O-ring isn’t the most productive – mine were given somewhat frayed when screwing and unscrewing the highest cap.

The tank’s chimney has the dome – conical — form this is now in style at the new wave of MTL atomizer as a result of it’s believed to offer higher taste and smoother airflow (and concept that started years in the past with RDAs just like the previous Magma RDA from Paradigm Mods).

At the peak cap you could have the similar laser-engraved textual content as at the authentic Berserker that claims: “Enter a state of wild fury.” It additionally has drop-shaped indentations which assist you unscrew by means of offering one thing to carry onto — however it’s nonetheless no longer splendid, particularly you probably have huge arms.

Construct deck

VandyVape mini MTL RTA

The Berserker Mini RTA makes use of a two-post deck that’s similar to the Svoemesto Kayfun construct deck. It’s intended for use with unmarried coils best. The design of the posts provides you with the liberty to coil your twine in both route, however I like to recommend construction to the proper (I’ll give an explanation for in slightly). The beefy, top-mounted Phillips screws supply house on your coil legs on either side. The airflow hollow is quite increased which calls for the coil to be put in with the legs beneath the wraps. You’ll need about 1 – 1.five mm of house between coil and airflow.

The wicking slots are at the deck, in contrast to different fresh MTL RTA’s just like the Innokin Ares, or Digiflavor Siren 2. I’d evaluate it to the wicking slots from the Augvape Merlin Mini, with the variation that the e-liquid will come thru somewhat hollow beneath the cotton, no longer from the facet. It is a pleasant design contact. While you wick a GTA-style RTA just like the Ares, your cotton can get trapped within the threading. This received’t occur with the Berserker Mini.

Airflow

VandyVape mini MTL RTA

The airflow keep watch over from the Berserker Mini is just about the similar as at the authentic Berserker. You may have 5 other airflow holes: zero.eight, 1.zero, 1.2, 1.four, and 1.6 mm. It may best be used with a unmarried airflow hollow, however you’ll be able to additionally additional regulate the dimensions of every hollow by means of quite turning the airflow keep watch over ring.

One facet of the adjustable air slot is extra tapered than the opposite, providing you with slightly extra versatility, despite the fact that it doesn’t make a large distinction. The AFC ring isn’t too tight, however unquestionably tight sufficient; it received’t regulate itself by chance.

The airflow comes from without delay beneath the coil during the little hollow I already discussed. It supplies an original MTL draw, even at the widest atmosphere — in contrast to the Digiflavor Siren 2 and Innokin Ares.

Efficiency

VandyVape mini MTL RTA

The primary construct I used at the Berserker Mini was once with one of the most Clapton coils supplied within the package deal. The set up wasn’t as simple as I was hoping. And now we come again to why I like to recommend wrapping the coils with the legs at the proper facet: whilst tightening the screws, they push away the leads from the coil and distort the 2 outer wraps. This doesn’t occur with simple spherical twine, simply Claptons. So if you select to make use of difficult wraps, make certain the legs are at the proper facet. Mike Vapes illustrates that during his video.

My construct got here out to zero.eight ohms. Wicking the coil isn’t specifically simple as a result of you wish to have to chop the cotton moderately brief. I tucked the cotton gently into the wicking slots, then once I felt somewhat resistance I finished and minimize of the remainder of the cotton that didn’t move in simply. Then I juiced up the wicks and screwed the tank on.

After filling the tank, I set my mod to 18 watts and began vaping, the usage of the tightest airflow hollow absolutely uncovered. The draw was once very tight and heat, however too tight for me. I attempted the entire airholes and concluded that the widest one works the most productive with the Clapton coil at 18-20 watts. The flavour is insane. My 25 mg salt-based mango e-juice by no means tasted higher! The draw continues to be tight sufficient for a just right MTL hit and feels very clean. I normally don’t use Claptons in MTL setups, however perhaps I will have to do that extra regularly.

The flavour is insane. My 25 mg salt-based mango e-juice by no means tasted higher!

My subsequent two builds have been 1.zero ohm and 1.56 ohms with commonplace spherical 26-gauge Kanthal. I used the similar wicking as sooner than and altered the wattage until I discovered my candy spot. The flavour was once nonetheless exceptional. I haven’t had any wicking problems up to now, and I’ve been chain vaping it. I’ve almost certainly refilled the tank about 3 times an afternoon since I started the usage of it. Taking into account it has a 2 mL capability and I’m just about chain vaping it, that’s lovely cheap juice intake.

As said, the O-ring at the peak cap turns out to wear down temporarily. I was hoping this wouldn’t be an ongoing factor, however it kind of feels to be simply that. There was once additionally somewhat piece of rubber floating round my tank — no longer actually one thing I sought after to peer, however no longer the top of the sector both.

I didn’t have any leaking or wicking issues all the way through the entire checking out length, no longer even after filling the tank with the airflow open.

Likes

  • 22 mm measurement is TPD compliant and nice for 22-based platforms
  • Simple to construct on particularly with spherical twine
  • Simple to wick
  • Simple to scrub
  • High quality machining
  • Easy airflow with many choices
  • No leaking or gurgling
  • Super taste
  • TPD compliant
  • Superb design
  • Competitively priced

Dislikes

  • Best cap O-ring wears out temporarily
  • Will want to fill up regularly with chain vaping
  • Threaded peak cap isn’t splendid for temporarily filling

Verdict

After vaping in this gorgeous tank for some time, I will extremely counsel it to any MTL vaper who has the slightest construction abilities. I will’t actually in finding the rest that speaks towards purchasing the Vandy Vape Berserker Mini. It’s virtually best! Frankly, I feel it’s a top-contender for the most productive mouth-to-lung RTA recently available on the market. In case you’ve attempted the Berseker Mini, I’d love to grasp if you’re feeling the similar. Pontificate within the feedback segment.

Save 10%

Purchase Now

The submit VandyVape Berserker Mini MTL RTA | Perfect MTL-Vape seemed first on Vaping360.

error: Content is protected !!
%d bloggers like this: